MPS-850 08" Mesh Head Kick Pad : Good, silent, not compatible with Alesis Turbo mesh at all

I thought it was compatible with my Alesis Turbo Mesh, but the trigger control unit does not recognize the pad. By replacing the entrance with the floor tom it works. Using with the Mac and ESX24 sampler and assign a kick wave to the floor tom midi signal is perfect.

I confirm the problem of the sensor too low in relation to the skin. Instead of putting extra foam rubber I preferred to raise the sensor by replacing the 4 mounting screws of 16mm with others of 30mm. To raise it I used rubber blocks, and by lifting it 8mm it adheres perfectly to the skin.

Now there is only the problem that the floor tom with the cable dedicated to the previous kick has a low sensitivity, and it would be necessary to change the control unit. The pad with the pedal is real, quite unlike the original Alesis pad. The hi-hat pedal should also be changed...