Behringer 962 Sequential Switch

Must Have module for sure!

the 962 Expands greatly on the capabilities of the 960 sequencer and is a great tool for routing and switching between signals to achieve complex modulation

best friend of the seq960

do an amazing job with the sequencer960, and its a lot of fun to play with

Perfect pair for 960

962 was made for the 960 sequencer, and it works perfectly. Build quality is like a tank, and the price is unbeatable! There are no cons for this purpose built module that does exactly what it is supposed to do.

Great to complete the experience of the Behringer 960 Sequential

I'm surprising how great is the quality of this modules.

Excellent module!

I recommend it for use in any Eurorac case. It is very useful. I use it mainly to change or replace a subject (instead of lowering or raising the volume in the mixer for example).

I recommend it for use in any Eurorac case. It is very useful. I use it mainly to change or replace a subject (instead of lowering or raising the volume in the mixer for example).

The price is very reasonable, it is highly recommended to buy more than one.

Extend the 960 sequencer to 16 or 24 steps

This is a v-trig driven 2 or 3 way switch. The 2/3 step selection is determined by patching an output from the 3rd step.

I use a pair of these to extend the 960 sequencers but it has other applications. It switches control voltages so can be used for switching between modulation sources like ADSRs. I have these in a large rig based on the Moog IIIp. I had the original Moog back in the day and these little eurorack clones work the same, are well built, smaller and cheaper. As it is driven by the rising edge of a v-trig you could use it with other systems. It works well with my Doepfer rig too. If you have a 960 sequencer you definitely need one of these.