Best Behringer Wing-Dante Alternatives

Based on 2 reviews

To provide Dante Stagebox via the Tio or Rio series of stageboxes. Gives compatibility across rest of our Yamaha Stock. Preamp control not available over the Secondary interface, so if you run in redundant mode with two cables/sets of switches, you only get preamp control on the primary link, so if it fails, you still get audio but you lose control.

Based on 1 reviews

It sounds good, I installed it on my Yamaha 01v96i, to add 4 additional balanced outputs, which I can use for monitoring, or to send separate channels (when we play gigs, we send separate signals to the FoH engineer as we use the 01v96i for stage mixing and signal processing/effects). DO NOT send +48V phantom power to these outputs (e.g. when feeding them into another mixing console): at first, everything works fine, but after 30mins to 1hour you'll start getting loud noise and hum. If you experience such thing, just switch off the phantom power for those channels on the second mixer. Anyway, a good unit, very useful for live concerts as either stage or FoH mixing.

Based on 2 reviews

Use with my SPL Gold Mike Mark 2 (model 2485) PreAmp. Very good internal converter Plug-In Card! The converter works fine on All frequencies with Internal and External synchronization. No SYNC Errors, no problem ever? Jast use an Optical Output or high-quality SPDIF cable and Power cable with Grounding connection in a power distributor and outlet.