BluGuitar Midi1

MIDI Adapter

Image BluGuitar Midi1

Rating :

1
2
3
4
5

stars

If you own this item for a while and already published a review somewhere on the internet, you can publish it again here with a custom past date :

Latest User Reviews

5 years ago

does the job

allowed me to connect my Amp1 to my HX stomp.

Did the job great.

8 years ago

Very expensive simple cable

this is a scammer a very simple expensive cable which would cost only less than 5 euros to make and its sold at almost 50 euros

9 years ago

midi up

Bought to midi switch the Bluguitar Amp1

Works great.

Seems alot for a small lead, but it does the job perfectly.

10 years ago

Good, expensive and a bit confusing

This works well as a product. Unfortunately,

1. the MIDI manual was not very clear on the BluGuitar manual (I was using a TC Electronic Nova System at the time). After a lot of Googling, I found this: >

This works perfectly, but I just wish this information was in the manual or bundled with the cable itself.

and

2. It's quite expensive for just a little cable!

Otherwise, works flawlessly.

10 years ago

Works great

Bought to control my AMP1 via midi, works like a charm. If you have any problems then check with BluGuitar, there are two different firmware versions and your AMP1 might work slightly differently to the instructions. Mine did, and a quick email solved the problem.

Read all reviews >>

Technical Data

  • Manufactured by BluGuitar
  • Released in 2015
  • Average price : $54
  • To control the BluGuitar AMP1 by an external MIDI controller
  • Connect to the remote socket of the AMP1
  • This is used to call up all the AMP1 switching functions via MIDI Program Change commands as well as control of Master Volume, Gain / Clean Volume, and PowerSoak via MIDI Control Change commands
Explore alternatives >>
Share linkedin post Tweet Share