Fusion by GLP SimpleDesk 24 DMX Controller
DMX controlThe SIMPLE DESK 24 is a 19" 24 channel DMX control panel, which can also easily be used as a faderwing via LTP. Through the dip-switch on the backside, several start addresses can be defined in a simple way: the SIMPLE DESK 24 via a 3-pole

Latest User Reviews
Great simple controller, double it up to make 48ch.
We have two of these to make a simple 48-ch desk, with direct "fader to lights" without a master section, programming etc to complicate.
They are also great as an expansion wing for any software or controller than accepts a DMX input.
We initially bought two of the similar looking budget branded alternative units, but they had problems with one channel imprinting slightly on the next. With tungsten lights it would have been okay as a flicker to 1% would have been okay but with LED it was causing visible flickering, so it's worth paying the extra for this desk which is rock solid, smooth fading and reliable values at the top and bottom of the faders.
Technical Data
- Manufactured by Fusion By GLP
- Released in 2013
- Average price : $239
- Standard DMX-512 protocol
- 24 channel faders
- 2 LED display for channel display & DMX value
- 10 channel dipswitch for DMX start addresses
- Selectable DMX display for 0 - 255 and 0 - 100%.
- Up to 4 SimpleDesk 24s can be connected
- Usable with most DMX light desks
- LTP support in DMX mode
- 3 pin neutrik male & female In / Out
- Built-in power supply: 110 V - 240 V (50 - 60 Hz)
You may also like
2023 100%
2023 80%
2023
2023
2023