MIDI Solutions Quadra Thru V2 5-stars Reviews

Does exactly what it says.

Splits midi 4 ways from my keystep pro. Does it perfectly. Make sure to check compatibility if you're going to buy, especially if you have older gear, it may not support the power needed via midi.

But it's super convenient, and a good price. I cannot fault it.

Does what you'd expect - beware of Power over MIDI

Splits your single midi lead 4 times, requires power over midi,

I originally had this connected to my Focusrite 18i20 but it failed to work because there wasn't enough power

Routed my MIDI out into a Lexicon MX400 MIDI input and connected the Quadra Thru to the Lexicons Thru output and it works!

It would have been nice if there was a battery bay to power the unit for situations where you can't power it over midi but honestly most times this isn't an issue

Does exactly what is says and thats it!!

Does the job

Doesnt need external power which is always a bonus. Build quality is ok but would be better if it were made of metal rather than plastic. Bought it to replace a 20 year old Phillip Rees box which did exactly the same job before it packed up. Its better build quality than that unit but at a far higher price. A lot of cheaper synths have no midi thru and for me its an essential. For example synching/driving 3 moog mother 32 units from a DAW is a bit of a pain without one of these.

It works. Nice quality.

Didn't do too much of sophisticated testing. But it works. It is nice it doesnt require any extra power and just works. Usually sending one cable in with midi clock from my Octatrack and then sending it out with multiple cables to sync tempo with my synthesizers and with my delay pedals... Nice quality of the product. I like it.

works like a charm!

Use is perfect as was intended.

MIDI Thru Box

Perfect, does what it says, saves you from getting a huge MIDI interface when you have multiple devices that do not have a MIDI thru port. Noice

Super!

Connected 3 instruments via MIDI to Digitakt using this device, now i am happy. And also i have opportunity to connect more))

Perfect for the job

Does exactly what it's supposed to, completely plug-and-play. The build quality seems fine. The small, minimal form factor is nice. If you're looking for a MIDI splitter, look no further!

Quadra Thru V2

Works fine with 4 external synths to my akai mpc live.

Works like a charm

Just plug and play...

Very handy tool!

I got the MIDI Solutions Quadra Thru V2 to trigger multiple synthesizers I have via my midi keyboard controller ; when i first tested it, I was quite satisfied with how straight forward it was to use as you would expect from a gadget like that and directly thought that it would definitely help any keyboard or synth player on stage or in the studio to trigger multiple synths from a single controller (particularly useful for sound design and when composing for film and TV)

The feel of it is not the heaviest ; but again for the price of it, it's perfect and does the job well!

I definitely recommend it for anyone in need to "distribute" midi signal.

Does the job

I bought this to use as part of my guitar pedalboard MIDI setup, to let me split the signal to go to an Electro Harmonix Hog 2 (which has no MIDI out port) while still being able to create a MIDI loop for my RJM Mastermind PBC.

This allows me to use Strymon's Nixie software to modify presets on a BigSky and Timeline through the Mastermind without having to disconnect my MIDI setup to plug in to them directly.

My use for this box may be quite niche, but I can vouch for its high build quality and the fact that it does what it says it will do without making a fuss.

Simple and useful MIDI routing product

I recently overhauled my MIDI routing in my studio and I found that using the Quadra Thru to be useful in allowing my to link my Moog Minimoog Model D to my hardware sequencer for note input whilst also allowing to distribute the same MIDI to my Motu Midi Express 128 and another synth module nearby.

Great device!

Works as advertised, big plus is power over MIDI, which makes life sooo much easier :)

Great!

Rock Solid! i have a lot of synths and mainly use the quadra thru to split and distribute clock around my studio

does what it says on the tin

4 Synths 1 Midi keyboard = Buy a Quadtra Thru

I have an Arturia key step and 4 synths and this little box lets me switch between my synths with ease. I just have to try and not buy more synths. Recommended.

Simple and effective

I picked this up so I could control multiple synths with one controller, and that's exactly what it does, takes MIDI from one device and sends it to four. The box itself is kind of flimsy feeling and made of plastic, but I don't see it being a problem. It's simple and it does the job, what more do you need?

Perfect

Does exactly what it is meant to do, sturdy and well made. Using it to drive an ARP, MS 20 from a beatstep pro.

Works as advertised, great product!

The title says it really. Works as it should. No problems. Sturdy build quality. Recommended.

A perfect midi "splitter"

This is an excellent piece of hardware that does exactly what you expect. The best thing about it is that it does not require any power - which means one less cable and one less wallwart.