RB-414CS Classic Series : H.B. Bass guitar

The bass guitar is very well made, everything works as it should. But, it didn't play as it should, the neck pickup was practically inaudible, the bridge pickup, it was very noisy!! Due to the very decent price, I did not complain about the bass, I dismantled the electronics and in approx. two days I identified and repaired the fatal defects in the connection. For example: 1. on a three-pole switch instead of a live conductor, a shield was connected!

2. on the output connector of the guitar "jack" there was a shielded wire connected in place of the live connector! 3. the output wire from the sensors was casually connected between the potentiometers. 4. It was necessary to fly away these errors, replace the output wire with a new longer one to reach the switch pin-connector. 5. The bridge-bridge was screwed in place with 4 screws, only two, so I fixed this defect. Overall, the guitar is great now, but the electronics were literally sloppy. Now the guitar plays as it should be balanced and the corrections react as they should. I did not send the guitar as a complaint, because I control electronics, and I was curious where the defects were!!! So the exhaust check was obviously not done. Due to these defects, it is possible that this good and reasonably priced guitar will be unnecessarily claimed by clients for careless finishing operations.

Because I am really satisfied with the guitar and the repair was successful, I give full points despite this shortcoming!!!

Regards, Thonann.