Doepfer A-190-8 Reviews

does the job, does it well

Needed to sync my modular with the DAW. I avoided midi for several years, recording/adjusting clock signals directly and routing the tracks into clock inputs. However after a while this got old, so I got myself this. I don't use the divider outputs, as I have enough dividers. Also I never needed the "run" gate, until last week, when I was playing with a friend whose main clock is mn tempi and the gate came really handy for start/stop.

Great Value

If your needs are modest and just need a clock from MIDI, then this is the baby. Reasonably priced, quality build. By the company that started it all. Get a rack full of their stuff and you will laugh at others who have 'esoteric' modules that are hard to use but have a different paint job. Highly recommend everything by this company.

Brilliant Module from Doefper

Been wanting this for a long time, I use it to hook up E-RM Midi Clock so I can finally run A155 in sync to a master clock

Works perfect with no issues, although I find the A154 Controller can be a bit temperamental when overriding Stop/Start with the A190-8, no issues running direct into A155.

Other than that I can't fault this very useful module.

Seems to work

Simple module - with a MIDI cable in, you can sync the eurorack clock to your MIDI gear. If you want the ability to do this, this is the module. I haven't used the USB, so can't comment on that.

Sometimes the clock glitches out slightly; I don't know if that's an issue with MIDI, the module or my sequencer but it's not too much of an issue.

Another nice Doepfer midi to cv module!!

very good product as usual with Doepfer.

It converts midi clock signal to trigger signals.

it's also a clock multiplier!

I use it in my modular with two "multiples", three "ADSR", a "clock diviser", and a sequencer.

Do not hesitate!!