Harley Benton MiniStomp Intersection

Simple, effective and cheap

It is an A/B box that does what it's supposed to. It splits the signal two ways. It also has a switch that allows two signals to be played at once so you can run a dual amp setup. It splits even if there is no power in the pedal, but I think it requires power for the dual amp setup to work. Didn't try that out, so dont hold my word on that. The split is seemless, no cracking, no noise, the pedal itself is dead silent. It is built like a tank and works perfectly. You get your moneys worth.

MiniStomp Intersection

A simple and very convenient pedal that does not require much learning. works flawlessly. the price is affordable for anyone

Really useful

It works really well in almost all scenarios, for example: - if a guitar is connected in Y and it is outputting to A and B, it can output to either by changing with the foot switch or - if you set the toggle to A&B in the above scenario, it splits the signal and sends it to both simultaneously; - if you add two guitars in A and B and output to Y using the A/B toggle, you select with the footswitch and it works great. - However, if you select A&B, it only outputs A normally, B is so weak that you have to turn up the volume to hear it. In my case, B is a guitar with humbuckers with a larger output than A, so I should be able to hear it. 4/5 stars in features for this. Another useful feature is that you can use the pedal foot switch without power because it will still change between A and B; I guess you need the power to see the light in a dark setting. Hopefully this will help others, since the manual is only one page, half being a photo and most of the other half is blank. Otherwise, it feels really sturdy and I don't feel any added noise or loud clicking of the switch. At this price, I'm very happy with it.

Very nice

It is very cheap and good quality, the only thing i don't like about it is that when i use it as 2 inputs to 1 output both signals lose so much signal it becomes unplayable. Using it as splitter for two outputs is perfect.

Simple & Effective

As an A/B switch between 2 guitars or amps this is a perfect 5* unit. If I needed the Y functionality it'd only be 4* due to the bad colour mixing on the LED as mentioned in someone else's previous review.

noisy

The jack from the cable (regardless which cable) was keep on coming slightly out of the input/output, which causes noise. Bad quality and unusable for me in this way.

Simple but great

This litle thing is top noch..

The most important no noise..

Completely silent..

A blind buy..

useful and affordable

simple, doing it's job. I use it to connect guitar to 2 amps simultaneously and enjoy "big" sound, but it can be used for other functions as well.

there is one thing that is not exactly as listed in specifications. there should be red LED light when only A selected, green for only B selected, and yellow for A+B, but in reality with A+B there is no yellow light at all, only green light with small, hardly visibe dot of red light at the same time. no big deal, but it shouldn't be specified that way.

of course, pedal can work without power. when A+B option is used, footswitch and LED light have no purpose anyway.

Why pay more?

Does what it says on the tin. In the gig accessory box just in case. The two inputs are quite close together, not enough room for two radio receivers.

Does the job for cheap

Considering the price a very decent unit, does the switching which it needs to do :)