Millenium MX-1000 5-stars Reviews

For mixers and much more..

I did some research before I decided on the MX-1000. Always check reviews, YouTube etc., before you hit the place-Order button. The max load is 80kgs(!) but my plan was to use it for the Behringer 2600 synth, that is some 6-7 kgs. Well, it was a perfect match, highly recommended!! Setup was so easy, you adjust the width for your device, then fasten the lock screws and voila! Very pleased with the small space it takes, perfect if your room is limited in space.

Stand offering so many uses

Super purchase here, got to hold mixing desk, but let your imagination run wild, actually contemplating getting another one of these, height, angle, sturdy and foldable, but honestly set and just leave it if you have the room, think of it this way as I have, no more getting small stools and tables within venues to put your gear up on, look smart, look professional, the Millenium MX-1000 mixer stand should definitely be in your next Basket, it's well worth its price

Very good stand for mixers

Very good stand for mixers, practical and stable. The only fault, if it can be called a fault, is that when it is assembled, the two screws collide and it cannot be clamped all the way, but it is nothing that limits your use, generally a very good stand.

Nice

Does exactly what I want it to do. It's a stand for my mixer. The quality and the handling could be a little better, but that's just me being picky, can't complain at all for that price.

super

really pleased with this stand, packs down well and has a small footprint in use, mixer doesn't rock or wobble at all. Could be taller given the average table height, but works well sat at a drum kit 👍

Strong and folds conveniently

I have gigged with this stand endlessly! Years on and it is still going strong!

Using it for my Tascam Model 24, fits perfectly.

Sturdy and stable, good price value

As expected

Solid as expected with a very decent price. Top!

For use with Alto live 1604

I use this stand for Alto live 1606 and it is perfect!. I like the angle of stand. Height is perfect and the ability to extend it in width is superb.

Good for this price.

Stable, foldable, compact and lightweight.

Very Sturdy

Very good quality, isn't going anyway as very stable. Slightly high when using a small mixer but still more than suitable for the job.

well built

I use this for my smaller PA system it works really well feels very strong and has no issues with wobbling, easy to set up and saves carring a table around for smaller gigs

Very handy

This is a very handy stand to have, saves you a lot if trouble and also makes the stage look great !! Quality is good also !

Great value for money

The Millenium MX 1000, simply put, is the best mixer stand for the price and is better quality than some of the more expensive ones, in my opinion.

This is from experience, as I also have the K&M 42040 Mixer Stand. The K&M one locks are now sticking quite frequently, after years of use, so I decided to buy the Millenium MX 1000 for live use and leave the K&M one set up in the music room. I went for the Millennium stand because the singer in one of my bands has had this stand for many years, and has never had a problem with it. It's still as strong as when he bought it 4 years ago.

It's wide enough to stand some of the larger mixers on, e.g. Behringer X32, which both my band's singer and I both own one of each.

For it's price, I can't fault it. Definitely worth the money

Solid and dependable stand

Needed a dependable stand for my large mixing desk during gigs. This fits the bill perfectly.

Opens wide enough to fit the amps underneath and the desk sits on top. Locks securely in place with wing nuts.

Folds flat for storage.

Nice and helpfull

Good quality, very practical, easy to setup and steady.

It is a little bit sticky when you open or close it. I would prefer to be a little bit lighter.

Compact Useful & Heavy Duty Enough

Overview

I couldn't have asked for a better stand for my Mackie Onyx 1620 Series mixer. I was worried it might take up too much space in my small studio, or that it would not be very sturdy considering the price. But on all counts this has far exceeded my expectations.

My Experience

I have used this for my Mackie Onyx 1620i Series Mixer in a pretty tight space in my home studio. I was impressed with how snugly this product fit into place, taking up the minimum amount of space and allowing for other things to fit between and next to it.

The first thing I was impressed by was how easy it was to assemble. Most of the work had been done for me, which is helpful for people like me who aren't very patient or are useless at DIY. A quick feel and it seemed very strong.

The mixer popped straight on top and stayed firmly in place. Most importantly it also felt like it was taking the weight easily, and had the stand has the flexibility to increase the size to hold something bigger. Put simply if I upgrade to a bigger desk, I won't need to replace the stand. The same applies if I get a smaller one.

No modifications of the desk were needed, it was the stand equivalent to plug in and play once it is together.

Something that is important to me as well, is how it looks. Again it passes with flying colours. It looks professional and easy on the eye.

Pros:

- Easy to assemble.

- Sturdy.

- Fits snugly into small studios.

- Can be used for multiple size desks.

- Doesn't take up much more space than it needs to.

Cons: (For my needs there have been none).

- A bit of extra space or rack mounting option would be nice.

- Crossbars at rear limit space for putting things underneath. But still leave space for things to fit.

Versitile stand

Use this with my A&H Qu-16 and its a charm. Quick to setup and compact for transport. Perfect for my type of gigs where I need to be setup in 30min with all my gear :)

Essential kit when gigging

I use this stand for Dynacord powermate 1000, and presonus 1642 desks.

It folds up small and is very solid. I do sound myself while playing and I find it very handy when stages are tight, as it allows me to store equipment under the desk between the legs of the stand.If you spend money on your desk it makes sense to have something sturdy to operate it from.

highly recommended.

Millenium MX-1000

I bought this stand for my Mackie powered pa,it is robust easy to fold,and good quality,does the job!!Good price too!