Botex UP-1 1 Channel Dimmer Reviews

so far, so good.

i love that it's settable without a controller and also super easy to dmx it. great capacity.

Used wirth a 500W Fresnel

Great smooth dimming curve.

Impressed that it also has the ability to go from being a dimmer to a switch pack (50%dmx is on - below 50% is off)

They don't warm up with a 500w load, although they do make the traditional buzz when the lantern is dimmed, very quietly though and inaudible from 1/2ft away

They feel pretty solid, accidentally dropped one and it chipped my floor but had no visible damage to the unit

The spacing to mount onto a bar is very small, possibly designed for an own-branded lighting system? I've not measured or looked further into this as wire ties and safety bond will suffice for my project

Only one down side, and I'm not sure if this was an ordering error on my behalf or a feature that cannot be changed; the output socket is a german/euro plug type. This is fine because I also ordered lanterns from here and wired a euro plug onto the end. However, I'd have to make up an adaptor to change this to a UK 13A or 15A socket

The display menu is printed on the front of the unit so you don't need to refer to the manual to figure out what all the symbols/letters means (Its a VERY simple unit to use anyway!)

Set the address, make sure its set to the correct mode (Dim or switch) and that's pretty much it.

Takes one DMX channel to operate.

High quality!

This one channel dimmer can be used for many different things because of its 6 amps limit it can be used to power two 650 w bulbs. with other four channel dimmer packs you get only 4 or 5 amps per channel. This dimmer pack has a very good feature that allows you to hang the dimmer on a T bar or on a truss. Can be used with no DMX controller as it allows you to dim manually from the device its self. Very light weight which is something that everyone likes especially when you have to transport the dimmers to different locations.

A great single channel dimmer

I use this dimmer pack for my blinders, as it gives a 6Amp per channel output, which is great as most 13amp units will only give a maximum of 5Amps per channel. I use one for each side of my 4 way blinders, so each dimmer powers two 650watt lamps.

The dimmer is easy to use as both a stand alone unit, and with control via DMX. it features a high quality LED screen, so you can easily ramp up and down the dimmer, and also with this the ability is given to achieve a very accurate value. The unit is also very easy to use via DMX, with the LED screen making it easy to address the dmx value of the unit.

Botex Dimmer

A little while ago I was in the market to buy a simple, single channel dimmer box to power a couple of par cans. The dimmer worked faultlessly in test. It's a solid construction that looks likely to last a long time. Big thumbs up!