the t.bone SSM 2 Reviews

It's compatible with the rode nt1.

Solid quality

Okay for home studio use.

It's okay for the price you pay for it.

The quality is not going to rock your world, but it is not awful.

I bought this for my home studio and it works just fine, but I never touch it, pack it away, or move it too much. It would probably be different, If I had to adjust it all the time, move it, take it off, or put it back on again.

If you're looking for something more professional, I would recommend paying a bit more for one, but If you need something basic, that works just fine, its perfect for that!

Great Replacement for stock Behringer B2 - Pro

Does whatever is expected from it. Good Cost and works well, even comes with extra bands.

Does it job well

This fits perfectly my the t.bone SC 400 microphone. The built quality seems good, and it doesn't feel weak at all.

For the money

IT is solid enough, screwed on to K & M mic stand no problem and fitted a focusrite microphone perfectly.

Feels solid and good quality for the price point

Does the job well. I can't hear a difference compared to alternatives that are several time more expensive ...

Kit include all accessory you need (thread adapter and replacement springs).

Also fits the microphone from the Focusrite kits just fine, it's on the upper limit of what it can accept but the foam pad ensure you don't scratch the mic and it is held very securely.

There is no competitor for this money at all!

Perfeito para vários modelos de microfones

Ótimo para Home Studio, ajuste perfeito para mic condenser, no meu caso um tbone sc400.

Já é minha terceira aquisição deste modelo.

A maior parte é feita em metal, e as partes feitas de elásticos parecem bem resistentes e duradouras (inclusive veio um kit extra com mais 2 elásticos para reposição ).

It's good!

If you are looking for a convenient priced/nice performance product then here it is! I'm using it with my old Røde NT1-A, holds it tight and fit, also you can use with other thinner ones if you like.

Good shock mount for the money

It's simple to use and great quality.

Only downside is that the tightening mechanism is coming loose all the time even after removing the washers around it.

great mount

I bought the shock mount for a little bit larger mic, a rode nt1a, cause i didn't want to spend so much money on the original one.

Despite the mic being larger (50mm) it fits with just little force inside the clip, providing a really tight and solid hold

Basic and great!

Just a simple, good shockmount that works! The plastic feels strong, as do the rubber/elastic bands. Using it for a CM25 MKiii that came with the 3rd Gen Scarlett solo studio pack. Its as if this shockmount was built for this mic. A perfect fit!

Cheap & does the job

Great price for the value, especially when you need this kind of a stand for your condenser mic. Make sure you get the dimensions right and get a small plastic bag to put the extra elastic things in !

It works well.

Decent quality and decent price. No problems with it.

Good value for money

Solid reliable product. Good value for money.

Very good

this is my 2nd time to both this. its nice product for a price.

Should have read more

This is a good quality microphone shock mount for use in a home studio. I should have done a bot more research though as it is a very tight fit for my Mic. I gave this 5 stars, even though it wasn't perfect for me, it did perform exactly the was is was specified to.

Did the job, just about

I had a cheap mic (AT2020 I think?), and I bought this because the 'official' shockmount was almost the same price as the mic.

It fit, and it worked reasonably well - but it was insanely tight, and incredibly difficult to open. When I first bought it, it was almost a two-man job to get a mic in it (though it did ease up a bit).

There was a small piece of felt inside, but at the opening of the ring, there's two metal tubes (which hold the spring levers you pull to open it up) which scratched the hell out of the mic. Not ideal.

On a slightly smaller mic, maybe it wouldn't have been an issue, but I measured the mic and bought the one that should have fit it.

Fantastic value for money

Been using these mounts for a few years now and they've never failed me yet!

I bought the SSM 2 specifically for an SE 2200 condenser mic which I use mainly for field recordings and demos so safe to say it's seen a fair bit of action. The build quality is great and it shows no signs of damage despite being treated quite roughly.

Only con is that the fit is extremely snug but after some time I eventually managed to fit it to the mic.

Would definitley recommend!

Durable

Very durable and great fit.