Best Eurolite DMX Move Bigfoot Foot Control Alternatives

Based on 2 reviews

This wing is amazing and far better than the v2. I use it for my professional research and pre-programming but it can be the ideal product to rent out if paired with an appropriate case. It is quite big as a wing but it has a sturdy chassis and it is very well built. I love the motorized faders and the multi-function encoders, it also has loads more buttons than the previous version. Compared to the previous version, the main additions to this wing are the 16 Xkeys, 8 faders, 5 dual-dial encoders, a variety of rotary encoders, an MA button and more. I am not a fan of the re-sized 'please' button which I believe should've stayed bigger than the others as in the GMA2 wing however, it's an amazing controller and I am really happy with it.

Based on 2 reviews

I bought this for a local club that had a few DMX lights all running of 1 dmx mode with up to 8 channels. They had an accident with their previous controller involving a glass of water so needed something to replace it and asked me to get them something that would do the job. This fitted their needs perfectly and does exactly what is needed. I opted for the LCD version as it was the same price as the None LCD version. To be honest you don't need the LCD but great to have it as looks better for the club.

Based on 1 reviews

I bought this lighting console for trade-show demos - where people unfamiliar with lighting control - can merrily play around with the sliders and see 'stuff happen'. I *want* it to be simple. So I needed a 16 channel DMX controller (because my gear does simple 4 channel RGBW, or a feature-rich 16 channel mode). This controller fitted the bill perfectly. No 'modes', memories or 'features' to get confused by. It also runs from 9V (so I can run it from a USB-PD to 9V barrel connector adapter, rather than the supplied power-brick and UK adapter) The only think I don't really like is the all-steel enclosure, which makes it rather heavy - in fact it's the heaviest single item in my back-pack portable set-up. Although the manual doesn't make this...

Based on 1 reviews

We have two of these to make a simple 48-ch desk, with direct "fader to lights" without a master section, programming etc to complicate. They are also great as an expansion wing for any software or controller than accepts a DMX input. We initially bought two of the similar looking budget branded alternative units, but they had problems with one channel imprinting slightly on the next. With tungsten lights it would have been okay as a flicker to 1% would have been okay but with LED it was causing visible flickering, so it's worth paying the extra for this desk which is rock solid, smooth fading and reliable values at the top and bottom of the faders.

Based on 4 reviews

This is great for simple day-to-day control of DMX lights. I'm fitting a range of LED lights for a stage in a community centre. For performances we use computer control for full control of the lights, but we need something simple for day to day use. That is where this 6-channel controller is brilliant. My lights are RBGAW-UV, and right now I have all the lights set to 6 channel DMX mode on the same address. I'm using this controller battery operated with a wireless DMX transmitter. I'm finding it really easy to directly control the lights from anywhere in that hall. I won't use this controller during our performance, but I will be permanently fitting it afterwards, so that other hall users can easily control the lights. I might even fit two, one for the lights on the front of the...

Based on 7 reviews

It was a little tricky to get used to at first, but once I got the hang of this, it's very easy to control and make some seriously wild lighting shows. I'm an amateur still so I never got to use more than one universe at a time, and never tried the super high end consoles, but this is a definite step up from using the simpler fader based dmx controllers. It's marketed for DJs mostly, but I don't see why you cant use it as a primary controller for any type of show. I only wish there was a way to control it remotely via ipad/laptop.

Based on 25 reviews

We bought this for a number of reasons, mostly that it accepts audio-in, for accurately synchronising our lights with the music being played. However, once we started using this lighting controller, we found that the other included features are incredibly valuable - and now we couldn't live without them! The scene programming and selection is incredibly intuitive - one could program a light show in a number of minutes. Couple that with Manual, Auto and Music modes, and the workflow becomes very fast. The chases are very good too, with more memory locations than I ever would have expected! The DMX-Master has a number of Banks for scenes/chases, but I'm unsure how many. Highly recommended!

Based on 23 reviews

Having tried with other desks and failed to achieve even the most basic programmed operations this desk (after carefully studying of the manual and various videos on Youtube) has enabled me to produce the lighting effects I've been looking for. Yes you can run your LED DMX lights on sound to light and even slave them together but with this well priced desk you can black them all out simultaneously, get them performing individually or running in pre-programmed moods to suit the music your are playing, vary the brightness form 0 - 100%, select the colour RGB or any RGB mix, strobing, flashing all still with the option to sound to light to the desk. This has really taken our band's light show into another league, well worth the time to set up and a good price!

Based on 3 reviews

I purchased one of these for an installation job. The particular application was to illuminate a display by controlling a set of 20 LED PARs with just a handful of scenes programmed to cross-fade slowly in a continuous loop. The controller is designed to work with fixtures having up to 24 channels with fixed DMX addressing, i.e. at intervals of 24. This means the set of 20 LEDs I was using didn't leave any scope for expansion even though these particular fixtures occupied only seven channels each. Programming of scenes was fairly straightforward and I achieved the desired results even though configuring fade-times was slightly confusing; there being different ways of achieving that: 'internal' and 'external' modes. I tried programming the scenes into a chase but found the best...

Based on 12 reviews

I bought this as an upgrade to a Chauvet Obey 40, just in time as the Chauvet gave the ghost on me setting up for a charity gig in June, Luckily had the Stairville mixer with me, spent a quick hour programming my 30 odd lights (All LED) and a couple of moving heads, Fog and Haze to save the day. It took me a while since then to get my head round the FX programs but they have become a useful addition to my show now. The USB function is brilliant as I work with a couple of bands on a regular basis and this allows me to program and save Scenes and chases to match their tracks and reload them for gigs...I will be getting more moving heads to use the Pan and Tilt and FX functions to better effect. Great little desk for smaller rigs like mine, real value for money